Yesterday, I cut down the output shaft of the forklift motor, and cut 3 inches off of the coupler. I did it with a heavy heart as it was perfect - and it cost 250 bucks :-) The good news is that I have a new ker-chunk situation - once I mill the 1/4 in adapter plate and put it into place, it will all bolt up. There is still about a .008 wobble - but I think that will diminish when it is bolted together. I measured the size. pitch, and depth of all the bolts needed and will buy them tomorrow. :-) Interestingly, when using a depth gauge in measuring the depth of the bolt holes adjacent to the fan blades, I withdrew the depth gauge and it was covered in my blood :-) it was still wet and red because I had previously gotten some gear oil on the top of the motor when positioning the tranny. It was pretty awesome - Like I said before, "A little part of me is in that motor forever." :-)
Awesome Projects in the Midwest (For entertainment purposes only - do not attempt at home)
Monday, September 6, 2010
Friday, September 3, 2010
Wrapping a wounded, broken finger with missing nail
I found a great product that will not stick to the meat under my fingernail - it is called adeptic. if it sticks, I just soak it in hydrogen peroxide and off it comes. It is a petroleum product - maybe someday it will be made with olive oil or something :-)
http://cgi.ebay.com/Adaptic-Non-Adhering-Dressing-/130411070302?pt=LH_DefaultDomain_0&hash=item1e5d1b035e
I put a 1cm strip (cut from the larger strips) around the tip, put regular gauze over that, put a bottom and end supporting splint under the finger and then use another awesome product I scored from the hand surgeon - tube gauze. they told me to change it out daily.
http://www.pocketnurse.com/sc/details.asp?item=06-51-0701
In addition to a tetnus shot the other day, they started me on cephalexin - an antibiotic called a cephalosporin that kills bacteria by "weakening cell walls." I wonder if it is also weakening the cell walls of the "scab" joining my semi-displaced distal phalanx.
http://en.wikipedia.org/wiki/Cefalexin
Hand surgeon is waiting to xray it until next week so the swelling is down a bit. Hopefully it is knitting fairly straight - i don't want hadware in my hand.
As far as the nail goes, doc says that you only need one nail bed cell to fire up nail growth. and he described the nail linda coming outta a pocket slot opening - and that sometimes one has to massage it open if it is damaged... and coax the new nail out - interesting.
http://cgi.ebay.com/Adaptic-Non-Adhering-Dressing-/130411070302?pt=LH_DefaultDomain_0&hash=item1e5d1b035e
I put a 1cm strip (cut from the larger strips) around the tip, put regular gauze over that, put a bottom and end supporting splint under the finger and then use another awesome product I scored from the hand surgeon - tube gauze. they told me to change it out daily.
http://www.pocketnurse.com/sc/details.asp?item=06-51-0701
In addition to a tetnus shot the other day, they started me on cephalexin - an antibiotic called a cephalosporin that kills bacteria by "weakening cell walls." I wonder if it is also weakening the cell walls of the "scab" joining my semi-displaced distal phalanx.
http://en.wikipedia.org/wiki/Cefalexin
Hand surgeon is waiting to xray it until next week so the swelling is down a bit. Hopefully it is knitting fairly straight - i don't want hadware in my hand.
As far as the nail goes, doc says that you only need one nail bed cell to fire up nail growth. and he described the nail linda coming outta a pocket slot opening - and that sometimes one has to massage it open if it is damaged... and coax the new nail out - interesting.
Sunday, August 29, 2010
Transverse or Tuft Fracture of Distal Phalanx with nail bed removal
Could have been so much worse... :-)



Pictured are the outside view, inside view, and the only damaged parts I found on the garage floor.
Here is a link that shows different types of fractures and their names:
http://www.merck.com/mmpe/sec21/ch309/ch309b.html
and describing distal phalanx fractures specifically:
http://www.merck.com/mmpe/sec21/ch309/ch309b.html
this link shows diferent finger injuries:
http://www.aafp.org/afp/2001/0515/p1961.html
as does this one:
http://www.eatonhand.com/hw/hw011.htm

Pictured are the outside view, inside view, and the only damaged parts I found on the garage floor.
Here is a link that shows different types of fractures and their names:
http://www.merck.com/mmpe/sec21/ch309/ch309b.html
and describing distal phalanx fractures specifically:
http://www.merck.com/mmpe/sec21/ch309/ch309b.html
this link shows diferent finger injuries:
http://www.aafp.org/afp/2001/0515/p1961.html
as does this one:
http://www.eatonhand.com/hw/hw011.htm
Saturday, August 28, 2010
OUCH!!!

Today, I cut off the input shaft on the Triumph Tranny. No Problem - I wrapped electrical tape around it - and that made a nice squareish place to cut. When it came to the output shaft on the Forklift Motor, the tape wouldn't stick right... so i fired up the motor - picked a spot and scribed a mark on it with a scribe. then, I rested my hand on the top of the motor - my finger went into one of the radial rectangular cutouts in the frame for airflow and got caught in the fan and I chopped off the end of my finger and finger nail and part of the nail bed and broke the finger while I was at it. Worst of all, it tore off 2 cooling fan blades. Bummer. I bled after that - and went to the urgent care where i got x-rayed, antibiotics, and a tetnus shot and they are getting me in to an orthopedic hand guy. Here is a picture :-) (X-Ray picture only - I cannot stomach looking at the finger long enough to photograph it. :-( )
Sunday, August 15, 2010
Progress on Spacer between Motor and Transmission
Went to Mendleson's yesterday and picked up a new old stock 13 inch stamped steel wheel and a couple 16 inch flange covers that are about .150 inches - I cut them down with a reciprocating saw with a bimetal blade and will weld it up soon. Best part... it KERCHUNKED with an awesome kerchunk when I sandwiched it together between the motor and tranny - haven't added the drum heads and cut bolt holes - but it is the correct thickness!! Sadly, I measured the runout of the output shaft of the Motor - and it is bent as I suspected... I will cut it in half to reduce the wobble and will work on the grooves and splines with a file to minimize the wobble - hopeflly removing it altogether - it is out by .013 in. - not much - but when amplified by the coupler... it has a good wobble to it at the moment.



Saturday, August 7, 2010
Progress on the Triumph (Nickname Pending)


I have decided to go with 144 volts rather than 156. 156 just seems kinda rude - and not even or lucky and not divisible by 48 (as in not able to be charged with 3x 24 dollar 48v Chinese chargers.) So, Nickname is now Pending. Thought about TR-96 (too anemic.) "'Lectric 6" rolls off the tongue - but 6 what? 144 could be a gross... but how does that relate to a car... I'll update when I discover what the car wants to be called. for now, I'll post a picture of the awesome Fork Lift Motor I bought in Amish Mennonite country Indiana. They had to sell it as the Church was getting on 'em for building electric cars. (Just Kidding.) Also, I installed some guages and placed all of the parts where they'll go. Only thing I need now is to weld up a spacer between the bell housing and motor. (The most exciting part so far has been the custom 14 - to 10 tooth adapter that a fellow made for me in West Virginia - I've fired up the motor and spun the tailshaft of the tranny and it was awesome if slightly vibraty - I think that when I bolt the motor to the transmission - most of the vibration will go away - either that or it will waste the bearing on the output shaft of the motor. :-) )
Wednesday, May 19, 2010
HAMVENTION !!!
I always go to Hamvention. I have a secret parking spot I always use in an nearby neighborhood and hoof it to the show. This proves difficult when I purchase something like, say, a Heathkit SB-102 with power supply. :-) SO - this year, I pulled a Sturgis (Trailered the electric bike close to the show and rode in triumphantly) and got a great parking spot next to the Porta-Potties! :-) It was another great show - unfortunately, upon my arrival, I keyed my Yeasu VX-5R and lost all output (Dead Finals) :-( My Kenwood is still chuggin away though) --> See Sidebar over there on the right column.
Subscribe to:
Posts (Atom)